Slideshow Image 1 Slideshow Image 2 Slideshow Image 3 Slideshow Image 4 Slideshow Image 5


KGNBP Pressure-Relief Grease Pneumatic Lubricator



KGNB and KGNBP are suitable for grease NLGI grades 000, 00 and 0.


Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities

dropping into the reservoir.


The action and interval time are controlled by the timer. It equips with a buzzer that sends warning

signal when irregular occurs.


The pressure relief system of KGNB and KGNBP is pneumatic and recommendation for air pressure

range is 4.5 ~ 8 kg. It has to work with CEB Type Volume Distributor which is designed as a singular

outlet with fixed discharge volume that each lubricating point has equal amount of lubricant. There are

different types of discharge volume options such as 0.03, 0.06, 0.10, 0.16, 0.20, 0.30,0.40, 0.50

cc/stroke upon request. Grease will feed during the operation time of the lubricator and the amount of

grease feeding is fixed.


Pressure switch can be added as optional for checking if the piping works normally. The standard

setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if

the pressure doesn't reach the default setting, it sends a alarm signal. NO (Normally Open) contact is

available on the request.


Magnet Level Switch is also an optional accessory that can be added upon request. It sends

continuous signal automatically when the grease level is lower than the minimum level.


When the motor temperature reaches 100, the sensor will be on to stop the motor continue running

about 5 minutes.


It has a pressure gauge that the operator can check the pressure easily.


For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button

can be used as manually grease feeding for no more than 3 minutes.


Application of Machines Equipment:


It can be used for the machines requiring strictly rationing grease flow.


It usually works with rubber or plastic machines, press machines, machine centers, woodworking

machines, etc.


  • Centralized Lubrication,Central lubrication,manual lubrication system

Chen Ying,manual lubrication system,Lubricator manufacturer

Copyiright © Changhua Chen Ying
Oil Machine CO., LTD.
All rights reserved.

Centralized Lubrication,Central lubrication,manual lubrication system